Fénix 200 PFC Welding Machine

Take advantage of our great offer on Kühtreiber's modern, professional welding inverter, the Fénix 200 PFC, wherever you need to weld a coated electrode (MMA) and a tungsten electrode (TIG). This inverted welder is suitable for professional or home use. The maximum power of the is 200 mA for the MMA method. The Fénix 200 PFC welding inverter has a built-in temperature switch to protect it from overheating. The device has a practical shoulder strap for better transport.  The compact dimensions and low weight makes it easy to carry.

Key Features of the Fénix 200 PFC Welding Machine

• Professional inverter welder used for MMA and TIG welding
• It will satisfy even the most demanding users
• Designed using energy-saving inverter microprocessor PFC technology
• The controls are integrated in the keypad
• Gives high performance and great welding properties
• Ability to manage up to 60% of network undervoltage
• May be used with power generator with min. output of 3.5 kVA (with A.V.R. feature).
• Optional use of up to 200m extension cable-cord.
• Compact dimensions
• Can be welded in decrease (in permanent) current in network from 90 V – by electrodes 1,6; 2,0; 2,5; 3,2; 4,0.
• Connection of a remote control to regulate welding current.

The Fénix 200 PFC Welding Machine is intended for use on power generators

Where you would not be able to weld with other welding units, the Phoenix PFC is most useful. FÉNIX is constructed by using energy-saving inverter microprocessor technology PFC highest levels with the using of a planar transformer, which modulates the input stream so that it has an almost ideal sinusoidal waveform, which provides up to 92% efficiency of the machine.
PFC technology ensures a stable welding process with fluctuating voltage el. network, even when using long extension cords and use electric generators, without any apparent difference in the arc. Another great advantage is its high performance and great welding properties. Even when the mains voltage drops from 90 V, the electrode can be welded in decrease (in permanent) current in network from 90 V – by electrodes 1,6; 2,0; 2,5; 3,2; 4,0. The Fénix 200 PFC welder will satisfy even the most demanding users.

Benefits of the Fénix 200 PFC Welding Machine

• The machine can be connected to an AC 90-265 V AC power source
• The welding machine is suitable for operation on power generators or with very long extension cables due to very low voltage under voltage und surges
• Lower level of electromagnetic interference is useful
• Higher efficiency thanks to high circuit breaker load (circuit breaker switches off later than non-PFC devices)

Additional information:

Power voltage:
50/60Hz - 1x ~ 230V (-60%; + 15%)

Range of welding current:
10 - 200A

Vacuum Voltage:
88V

40% load (at 40°C):
200A

60% load (at 40°C):
165A

Load 100% (at 40°C):
145A

Mains power / power 60%:
20 A / 4.6 kVA

Protecting slow:
20A

Cover:
IP 23S

Terminal for welding connection.

cables/cords:
10-25 / 35-50

Recommended type of burner:
SR 17V

Dimensions L × W × H:
425 × 112 × 225mm

Weight:
5.5kg