SCYTHE SCNJ-4000 Ninja 4

The latest model in the Ninja series has been developed for uncompromising performance. The most exciting features include new airflow technology, optimum heat transfer alignment, and a Hyper Precision Mounting System back plate for fixed installation and easy installation. All these improvements in conjunction with an adjustable 12cm diameter fan provide increased cooling performance while reducing weight compared to the older model. The design of the cooler allows you to assemble the fan on all four sides, ensuring optimal airflow in every situation.

The clever arrangement of cooling fins allows the use of a further pair of fins without any negative effects on the weight or height of the cooler and optimises cooling performance in the lower fan speed range. The new built in fan model allows you to set maximum speeds in up to three modes with the slider switch. The user can choose between extremely quiet operation or maximum cold air. This also affects the power consumption.

Specifications

Width

130 mm Done!

Height

155 mm Done!

Depth

153 mm Done!

Cooling

By air Done!

Maximum speed

1,500 RPM Done!

Dimensions

Width

130 mm Done!

Height

155 mm Done!

Depth

153 mm Done!

Parameters

Cooling

By air Done!

Fan speed

Maximum speed

1,500 RPM Done!

Maximum loudness

29.5 dB Done!

Airflow

84.64 CFM (143.81 m3/h) Done!

Speeds control

Manual speed control Done!

Socket

AMD socket

AM2, AM2+, AM3, AM3+, FM1, FM2, FM2+ Done!

Intel socket

1150, 1155, 1156, 1200, 1366, 2011, 2011-3, 2066, 775 Done!

More Specifications

Note:

This product is not an independently functional unit and may require professional installation.

Specifications can be changed without notice. Images are for illustrative purposes only.

Zdravím, chcem sa opýtať či sú v balení k chladiču už aj nové podložky pre socket 1151 na menší pritlak chladiča.

Customer,

13. 06. 2016,

4 answers

Dobry

Customer,

23. 02. 2016,

1 answer

zdravím, dostanu tento chladič do case zalman z3 plus?

Lenka Nečasová,

29. 01. 2018,

1 answer

Dobrý den, je stále součástí balení šroubovák? A vejde se do Zalman Z3, když je již v zadní pozici nainstalovaný 120mm ventilátor? Předem děkuji za odpověď.

Tomáš Procházka,

05. 06. 2017,

1 answer

Zdravím, chcem sa Vás opýtať či už je súčasťou balenia aj SCYTHE SCAM4-1000B Mounting System for AM 4 Type B, ďakujem.

Customer,

17. 04. 2017,

1 answer

Je k tomu už aj kit pre AM4, resp chystá scythe nejaky mounting kit? Dôležité info pri rozhodovaní. Ďakujem

Customer,

11. 02. 2017,

1 answer

bude stacit tento chladic na I7-7700k ? alebo niaka lepsia varianta ak by bolo miesto vodneho chladenia. dakujem

Customer,

07. 02. 2017,

1 answer

Zdravim. Mam od Vas zakupenu maticnu Gigabytte Z170X Gaming 5, potom Ramky Kingston DDR4 2400MHz HyperX Savage Black. Zmestia sa tie ramky pod tento chladic na tejto doske?

Customer,

01. 02. 2017,

1 answer

Zdravím, zaujímalo by ma či v prípade ak použíjem zakladnu desku GIGABYTE Z170-Gaming K3 (odkaz https://www.alza.sk/gigabyte-z170-gaming-k3-d4025749.htm ) a chladič (odkaz https://www.alza.sk/scythe-scnj-4000-ninja-4-d2920693.htm ) či nebude tento chladič zavadzat tymto Ramkam Kingston 16 GB KIT DDR4 3000 MHz CL15 HyperX Predator Series (odkaz https://www.alza.sk/kingston-16gb-kit-ddr4-sdram-3000mhz-cl15-hyperx-predator-series-d4300647.htm#discussionPosts ) ??? tento chladič sa mi zda byt naozaj obraovsky tak mam z toho obavu či to mam vôbec kupovať alebo zobrať radšej niečo ine

Customer,

17. 12. 2016,

1 answer

Dobrý den, musí se ještě žádat výrobce o opravnou sadu, nebo je to už vyřešené(velký tlak na procesor) jedná se mi o socket LGA 1151

Customer,

10. 12. 2016,

2 answers

SCYTHE SCNJ-4000 Ninja 4

Don't like the alternatives? Choose from the full product list